Skip to main content
Skip to main content

Industrial PPE · Australia & New Zealand

Personal Protective Equipment matched to the workplace

Personal protective equipment for industrial manufacturing environments. Proftek supplies premium PPE including safety footwear, disposable gloves, and workplace protection products from leading brands, supporting Australian manufacturers with reliable, compliant safety solutions.

Discuss your PPE requirement
Personal Protective Equipment PPE category
Technical selection · Application guidance · ANZ support

Choose an application pathway

Explore personal protective equipment categories

Start with the hazard and working environment. ProfTek can help compare protection classes, fit, comfort and applicable standards.

0 products

Fall Protection

ProfTek supplies the complete Sir Safety fall protection range for working at height, harnesses, fall arrest devices, energy absorbers, lanyards, carabiners, mobile anchoring systems, and pre-assembled climbing, roofing, and maintenance kits. Every component is EN-certified for the European standard most directly referenced by AS/NZS 1891.System Components & StandardsHarnesses, EN 361 full-body with dorsal + sternal D-ringsFall Arrest Devices, EN 360 self-retracting lifelines (SRLs) up to 15 mWork Positioning Systems, EN 358 lanyards and accessories for hands-free working at heightRopes & Lanyards, EN 354 fixed-length and adjustableCarabiners & Connectors, EN 362 steel and aluminium, manual and auto-lockingEnergy Absorbers, EN 355 limits impact force to less than 6 kNMobile Anchoring Systems, EN 795 temporary and reusable anchor pointsPre-Assembled Kits, climbing, roofing, and general maintenance bundlesCompliance-Driven Recurring CyclesFall protection is a category where compliance dictates spend pattern. EN/AS/NZS standards require harness inspection every six months and after every arrest event, with formal annual recertification by a competent person. Lanyards, energy absorbers, and SRLs follow the same schedule. ProfTek can assist with inspection scheduling, replacement-cycle planning, and bulk supply for safety officers managing rosters of working-at-height crews. For new sites, our team can specify a complete pre-assembled kit (harness, SRL, lanyard, carabiners, anchor) matched to the task, roofing, scaffold, confined space, or rope access.

View products →
0 products

Gloves

ProfTek stocks 154 SKUs of Sir Safety industrial safety gloves across 8 sub-categories, every certification class from EN 388 mechanical protection through to EN 374 chemical resistance and EN 407 heat protection. Designed for Australian and New Zealand manufacturers, food processors, fabricators, and laboratories.Sub-Categories & StandardsLeather Safety Gloves, split leather, full-grain, reinforced palm; EN 388 abrasion + tearMechanical Protection, EN 388 nitrile/PU-coated, for assembly, automotive, general industry (94 SKUs)Cut Resistant, EN 388 Levels A–F, HPPE and Kevlar linersHeat Resistant, EN 407 contact and convective heat, for welding and foundryCold Resistant, EN 511 thermal, for cold storage and outdoor winterSpecial Protection, arc flash, vibration, antistatic, high-visibilityChemical Protective, EN 374 nitrile, neoprene, PVC against acids, solvents, oilsDisposable, nitrile, vinyl, biodegradable for food, lab, and medical useSpecifying the Right GloveGlove selection is rarely one-size-fits-all. A fabrication shop will need Level D or E cut protection on the part-handling side and a softer mechanical glove on the inspection side. A chemical-handling site needs EN 374 with breakthrough-time test data per substance. ProfTek can supply SDS-aligned glove matrices, sample packs, and bulk pricing for standard issue. Recurring monthly cycles (disposables, cut-resistant rotation) can be set up with auto-replenishment to remove the procurement overhead.

View products →
0 products

Head & Respiratory Protection

ProfTek supplies the full Sir Safety head and respiratory protection range, industrial safety helmets, disposable and reusable respirators, face shields, hearing protection, and portable gas detectors. EN-certified hardware with cartridges and consumables held in Australian stock for fast cycle replenishment.Sub-Categories & StandardsSafety Helmets, EN 397 industrial helmets and bump capsBump Caps, EN 812 lightweight head protectionFirefighting Helmets, EN 443 structural firefightingFFP2 / FFP3 Respirators, EN 149 disposable, with and without valvesFace Masks, EN 140 half-face / EN 136 full-face with replaceable filter cartridgesFace Shields, EN 166 polycarbonate and mesh, for grinding, welding, forestryEar Muffs / Ear Plugs, EN 352 hearing protection with SNR ratingsGas Detectors, single-gas and multi-gas portable monitors (BW/Honeywell-compatible)Recurring Revenue & Compliance CyclesThis category is where most Australian industrial sites have ongoing PPE spend. Disposable respirators are consumed daily on dusty sites; reusable mask cartridges expire on a fixed calendar regardless of use; gas detector sensors need annual replacement and bump-test consumables. ProfTek can set up subscription replenishment for any of these line items, with cycle dates aligned to your maintenance schedule. For specifying respirator class against airborne contaminant, our team can match EN 149 / AS/NZS 1716 P-class to the SDS and exposure limits.

View products →
0 products

Protective Workwear

Protective workwear for industrial and mine site applications, including antistatic, high visibility and multinorm garments. Contact ProfTek for help matching garment capabilities to the task and workplace risk.

View products →
Safety footwear
130 products

Safety footwear

Reliable safety footwear is essential for protecting workers while supporting comfort, productivity, and long-term wellbeing in demanding workplaces. Across industries such as construction, manufacturing, logistics, warehousing, utilities, and maintenance, the right protective footwear plays a critical role in reducing workplace injuries and maintaining safe daily operations. Our range of safety footwear is designed to combine certified protection with modern comfort, durability, and performance, helping protect against key workplace hazards including impact, compression, slips, punctures, and unstable or uneven surfaces. By meeting recognised safety standards, well-designed safety shoes and boots support workplace compliance while allowing workers to remain comfortable, focused, and productive throughout the workday, even in challenging environments.

View products →

Current personal protective equipment range

Featured products

Specifications and application guidance are available on each product page. Contact ProfTek if you need help comparing options.

No products are currently published directly in this category. Explore the categories above or contact ProfTek for assistance.

Application-led selection

The right PPE depends on more than product specifications

ProfTek helps safety and procurement teams consider the complete workplace risk before selecting or replacing PPE.

Hazard & protection classMatch protection to impact, compression, cut, chemical and specialist hazards.
Fit & worker comfortConsider sizing, support, weight, mobility and all-day wearability.
Work environmentConsider temperature, moisture, surfaces and task conditions.
Safety & complianceAssess handling, documentation and environmental obligations.

Need help selecting or replacing PPE?

Share the workplace hazards, environment, workforce and current product. ProfTek will help identify the most practical next step.

Discuss your requirement
Privacy consent*