The NANO MASTER SMP-III is a dedicated ultra-small dosage dispenser for applications where every nanolitre counts. In biotech, diagnostics, and microelectronics, an ultra-small dosage dispenser is essential for achieving repeatability at the sub-microliter scale. No other ultra-small dosage dispenser in the Musashi range combines this level of precision with such compact, laboratory-friendly design.
For technical specifications and the full Musashi Engineering product catalogue, visit the Musashi Engineering official website or explore the complete Prof-Tek dispensing solutions range.
The NANO MASTER SMP-III from Musashi Engineering is an ultra-precise volumetric dispensing system designed for dispensing microscopic amounts of fluid as small as 0.0001 μL (1/10,000,000 mL) per shot. It is the instrument of choice for pharmaceutical research, medical device manufacturing, diagnostics, and bio-laboratory applications where volume accuracy is critical.
The SMP-III uses a digital plunger control system to achieve exceptional repeatability and dose accuracy — far beyond what is possible with conventional air pulse dispensing. Available in 30 mL and 50 mL syringe configurations with microcomputer-based digital control.
The NANO MASTER SMP-III supports a dispensing volume range of 0.0001 to 50,000 μL, covering everything from single nanolitre research doses to multi-millilitre production fills. Its four operating modes — Timed, Manual, Fine Timed, and Fine Manual — give laboratory operators and production engineers complete flexibility to match the dispense pattern to the process.
Applicable materials include optical adhesives, anaerobic adhesives, UV adhesives, silicone resins, liquid medicines, volatile liquids, flux, and precision inks — making it equally valuable in electronics manufacturing, pharmaceutical filling, and life science applications.
The NANO MASTER SMP-III is widely used for precise filling of pharmaceutical vials and cartridges, diagnostic reagent dispensing, micro-dot adhesive application on medical devices, and laboratory research dispensing. Its combination of nanolitre-scale accuracy, digital control, and broad material compatibility make it the leading choice wherever trace-quantity dispensing is required.
Volume range: 0.0001 μL to 50,000 μL. Syringe capacity: 30 mL or 50 mL. Control: microcomputer-based digital plunger drive. Operating modes: Timed, Manual, Fine Timed, Fine Manual. The digital plunger mechanism provides far higher volume accuracy and repeatability than air pulse systems, particularly at very low dispense volumes where air pressure variations would cause unacceptable dose variability.
The SMP-III is designed for compatibility with a wide range of fluid types including volatiles, high-purity liquid medicines, and UV-sensitive adhesives — with the dispensing pathway designed to minimise dead volume and material waste in high-cost fluid applications.
In pharmaceutical and diagnostic manufacturing, dosing accuracy directly impacts production economics. The NANO MASTER SMP-III’s digital plunger control eliminates the volume variability inherent in air pulse systems, improving both yield and product quality. For medical device assembly, its ability to place micro-dot adhesive volumes with nanolitre precision enables miniaturisation and process repeatability that conventional dispensing cannot achieve.
Prof-Tek supplies the NANO MASTER SMP-III to life science, medical device, and electronics manufacturers across Australia and New Zealand. Our team can assist with application-specific configuration, operator training, and ongoing technical support. Contact Prof-Tek to discuss your ultra-small dosage dispensing requirements.
Musashi Engineering, Inc. has specialised in precision fluid dispensing technology since 1981, developing expertise that spans electronics, automotive, pharmaceutical, and life science applications. The NANO MASTER SMP-III is one of Musashi’s most specialised instruments, designed for the applications where nanolitre-scale accuracy is a process requirement rather than an aspiration.
For life science companies, diagnostic instrument manufacturers, and pharmaceutical producers in Australia and New Zealand seeking this level of dispensing precision, Prof-Tek provides direct access to Musashi’s technology with local application support, demonstration facilities, and technical service. Contact Prof-Tek to arrange an evaluation and discuss how the NANO MASTER SMP-III can meet your ultra-small dosage dispensing requirements.
Contact Prof-Tek to discuss your nanolitre-scale dispensing requirements and explore whether the NANO MASTER SMP-III is the right instrument for your application. Our team can provide product demonstrations, application-specific guidance, and quotations for life science, medical device, pharmaceutical, and electronics customers across Australia and New Zealand. We are committed to helping you find the right dispensing precision for your most demanding processes.
41/51 Wentworth Ave, Pagewood,
NSW 2035
Sales@prof-tek.com
Powered by BsharpTech