XAVIS FSCAN-3280D and FSCAN-3280DAC are conveyor X-ray inspection systems for small packaged food products. Compare the standard and air-conditioned versions with ProfTek for your Australian production line.
| Specification | FSCAN-3280D | FSCAN-3280DAC |
|---|---|---|
| Configuration | Standard | Air-conditioned |
| Tube voltage / power | 80 kV / 100 W | |
| Maximum inspection width | 230 mm | |
| Conveyor width | 270 mm | |
| Conveyor speed | Up to 49 m/min; options may change the maximum | |
| Maximum product weight | 5 kg | |
| Machine dimensions (H × W × D) | 1433 × 905 × 673 mm | 1433 × 905 × 844 mm |
| Machine weight | 210 kg | 221 kg |
| Display / supply | 15-inch touch monitor / 220 V single-phase | |
The manufacturer lists applications including meat, agricultural and seafood products, bakery products, pouches, cans, bottles and boxes. Suitability depends on the product, packaging and inspection task. Foreign-material sensitivity varies with physical properties and operating conditions.
Provide sample packs, dimensions, weight, line speed and the contaminants you need to evaluate. A representative trial should establish achievable detection and rejection performance for your product.
Published values are a selection guide, not a performance guarantee. Confirm the current supplied configuration, installation requirements and test results before ordering.
The FSCAN-3280L and 3280LAC extend the small-product inspection family. Both are listed with an 80 kV, 100 W X-ray source, a 270 mm belt, a maximum conveyor speed of 49 m/min and a maximum product weight of 5 kg.
The supplier also references the small-product configuration in pharmaceutical overhead inspection. This is an application cross-listing within the family.
Provide pack dimensions, weight, packaging material and the inspection target when comparing L/LAC with the D/DAC configurations. The conveyor maximum does not establish the inspection result or achievable line rate for every product. Any proposed evaluation should use representative products and agreed test conditions.
See official FSCAN-3280L/LAC information and the XAVIS equipment range.
