ProfTek represents Hesse Mechatronics in Australia and New Zealand, connecting manufacturers with wire bonding, ultrasonic welding, laser welding and related automation. The range spans development equipment, production machines and configurable handling and software solutions.
The Bondjet range includes fine-wire machines BJ855 and BJ885, heavy-wire models BJ955, BJ959 and BJ985, the dual-head BJ931 and the BJ653 development platform. Selection depends on the connection, material, assembly geometry and production workflow.
The BJ653 provides a route for laboratory and small-batch work. Production systems offer different working envelopes and handling possibilities. The LSB959 adds laser-assisted thermosonic processing for suitable heavy-wire applications, combining local heating with bonding.
Hesse Mechatronics also offers the SW1089 ultrasonic welding system and LW1089 and LW2095 laser welding systems. Their process principles and application requirements differ. A technology review should start with the joint material, geometry and required result, rather than assuming one method can replace another without trials.
| Requirement | Range to discuss |
|---|---|
| Fine-wire connections | BJ855 and BJ885 |
| Heavy wire and ribbon | BJ955, BJ959 and BJ985 configurations |
| Development and smaller batches | BJ653 |
| Dual-head processing | BJ931 |
| Locally heated heavy-wire bonding | LSB959 |
| Ultrasonic welding | SW1089 application review |
| Laser welding | LW1089 or LW2095 application review |
Hesse Mechatronics provides options for setup, monitoring, handling and data management. PiQC concerns process monitoring; E-Box supports tool adjustment. Automation and production-cell arrangements address product movement and presentation. Software covers programming, synchronisation and production-data exchange. Select each against a defined requirement rather than assuming inclusion.
Consider fixtures and material flow early. A product inside the nominal working area may still require a particular support or access arrangement. An output target must include loading, identification and unloading, not only connection-making time.
To discuss Hesse Mechatronics equipment with ProfTek, provide drawings, material information and representative samples where available. Identify connection requirements, volume, the existing process and the problem to solve. For automation, include carriers and the proposed sequence.
The next step is an application-specific scope distinguishing the machine from heads, fixtures, monitoring, handling and software. Agree trial and acceptance criteria before treating a proposed configuration as a qualified production solution. ProfTek can help organise the initial discussion for Australian and New Zealand manufacturers.
Explore ProfTek industrial equipment, the official Hesse Mechatronics website and LW2095 product information.