Industrial PPE · Australia & New Zealand

Fall Protection matched to the workplace

ProfTek supplies the complete Sir Safety fall protection range for working at height, harnesses, fall arrest devices, energy absorbers, lanyards, carabiners, mobile anchoring systems, and pre-assembled climbing, roofing, and maintenance kits. Every component is EN-certified for the European standard most directly referenced by AS/NZS 1891.System Components & StandardsHarnesses, EN 361 full-body with dorsal + sternal D-ringsFall Arrest Devices, EN 360 self-retracting lifelines (SRLs) up to 15 mWork Positioning Systems, EN 358 lanyards and accessories for hands-free working at heightRopes & Lanyards, EN 354 fixed-length and adjustableCarabiners & Connectors, EN 362 steel and aluminium, manual and auto-lockingEnergy Absorbers, EN 355 limits impact force to less than 6 kNMobile Anchoring Systems, EN 795 temporary and reusable anchor pointsPre-Assembled Kits, climbing, roofing, and general maintenance bundlesCompliance-Driven Recurring CyclesFall protection is a category where compliance dictates spend pattern. EN/AS/NZS standards require harness inspection every six months and after every arrest event, with formal annual recertification by a competent person. Lanyards, energy absorbers, and SRLs follow the same schedule. ProfTek can assist with inspection scheduling, replacement-cycle planning, and bulk supply for safety officers managing rosters of working-at-height crews. For new sites, our team can specify a complete pre-assembled kit (harness, SRL, lanyard, carabiners, anchor) matched to the task, roofing, scaffold, confined space, or rope access.

Discuss your PPE requirement

Technical selection · Application guidance · ANZ support

Choose an application pathway

Explore fall protection categories

Start with the hazard and working environment. ProfTek can help compare protection classes, fit, comfort and applicable standards.

11 products

Carabiners

Sir Safety carabiners and connectors are EN 362 certified for fall protection and work-at-height systems. Steel and aluminium options with manual screw-lock, auto-locking, and triple-action gate mechanisms, supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 362:2004 (connectors)Class A: Anchor connector (large gate opening for structural attachment)Class B: Basic connector (general use)Class T: Termination connectorLocking: Manual screw, auto-twist, triple-action (push-twist-pull)Range: Berg, Anapurna, Montblanc, Maxi Hook, Maxitube, Simplex, Classique, Ciber, GripmaxSelection NotesAuto-locking and triple-action gates are preferred for hands-busy tasks and primary load-bearing connections. Manual screw-lock carabiners are acceptable for secondary connections where time-to-connect is critical. Steel carabiners offer higher strength and durability, aluminium offers reduced weight for high-volume use. ProfTek can supply pre-bundled carabiner sets matched to harness, lanyard, and anchor specifications.

View products →

1 products

Climbing Kits

Sir Safety climbing protection kits bundle the full fall protection system into a single SKU, harness, lanyards, energy absorber, and carabiners selected for vertical climbing tasks (towers, ladders, scaffolds). Supplied across Australia and New Zealand by ProfTek for sites that prefer turnkey procurement over component-level specification.Kit Contents (Typical)Harness: EN 361 full body with dorsal + sternal attachmentLanyard: EN 354 forked (Y) lanyard for continuous attachment during climbEnergy absorber: EN 355 integratedCarabiners: EN 362 auto-lockingStorage: Carry bag includedWhen to Choose a Kit vs ComponentsKits are the right choice for new crews, training environments, and infrequent users where component specification expertise is limited. They guarantee a compatible matched set and simplify procurement. Experienced rope-access and structural-steel crews typically prefer component-level selection. ProfTek can supply either pathway and arrange formal user training for new kit users.

View products →

17 products

Energy Absorbers

Sir Safety energy absorbers are EN 355 certified shock-absorbing components for fall arrest systems. Designed to limit the peak impact force on the worker to less than 6 kN by deploying up to 1.75 m of tear-stitch webbing, supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 355:2002 (energy absorbers)Peak arrest force: Less than 6 kN (compliance limit)Deployment length: Up to 1.75 m of tear stitchingForms: Standalone absorber, integrated lanyard, forked (Y) lanyard, elasticated webbingOne-time use: Energy absorbers that have deployed must be retired immediatelyCritical Use NotesAn energy absorber that has activated cannot be reused, even partial deployment retires the unit. This is non-negotiable per the EN 355 standard. Visible inspection at the start of every shift is required. ProfTek can supply replacement absorbers in bulk for sites where deployments occur regularly and arrange formal user training on inspection criteria.

View products →

13 products

Fall Arrest Devices

Sir Safety fall arrest devices include EN 360 certified self-retracting lifelines (SRLs), block fall arresters, and stopper-type devices for working at height. Cable, webbing, and kernmantel rope options up to 15 m, supplied across Australia and New Zealand by ProfTek. Technical Specifications Standard: EN 360:2002 (self-retracting type) Working length: 1.5 m / 2 m / 15 m Cable types: Galvanised wire rope, webbing, kernmantel rope Integrated shock absorber: All SRLs include energy absorber to limit arrest force to less than 6 kN Range: MAXI Eagle (cable + webbing), Stopper, Block with shock absorber, Twin Stopper (two-leg) SRL vs Lanyard Decision SRLs activate within centimetres of fall onset, reducing fall distance significantly compared to a fixed-length lanyard plus shock absorber. They are the preferred device on leading-edge work, roofing, and any vertical scaffold. Annual recertification by a competent person is mandatory per the standard. ProfTek can supply SRLs in lengths matched to the work platform and arrange inspection scheduling.

View products →

9 products

Harnesses

Sir Safety fall arrest safety harnesses are EN 361 certified full-body harnesses for working at height, construction, scaffolding, roofing, tower work, and rope access. Available with dorsal and sternal D-ring attachment points, plus high-visibility integrated vest options. Supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 361:2002, refers to AS/NZS 1891.1Webbing: 44 mm polyester, 23 kN breaking forceAttachment points: Dorsal D-ring (standard), sternal D-ring (most models), lateral hip rings (work positioning)Adjustment: Sliding buckles or quick-connectRange: Stratos 3, Stratos 20/30, Sokoi 11/13/14, Secret (with integrated hi-vis vest), Avao FastInspection & Service LifeEN/AS/NZS standards require harness inspection every 6 months and after every fall arrest event. Visible damage (cuts, fraying, hardware deformation) requires immediate retirement. Typical service life is 5 years from first issue with regular use. ProfTek can supply harness inspection logs, registration tags, and replacement stock for fleet management. For roofing and scaffolding teams, pre-assembled kits (harness + SRL + lanyard + carabiners) are available in the Climbing, Roofing, and Maintenance Kits categories.

View products →

5 products

Maintenance Kits

Sir Safety maintenance and construction kits bundle a general-purpose fall protection system for trades, facilities maintenance, light construction, and infrastructure work. Components selected for versatility across multiple task types, supplied across Australia and New Zealand by ProfTek.Kit Contents (Typical)Harness: EN 361 full body, often with lateral D-rings for positioningLanyard: EN 354 with integrated EN 355 energy absorberAnchor: EN 795 portable anchor (mobile or webbing sling)Carabiners: EN 362 auto-lockingCarry bag: IncludedUse CasesGeneral maintenance teams covering multiple work platforms benefit from a one-kit-fits-most approach. Roofing and rope access teams typically need task-specific kits (Roofing Kits, Climbing Kits). ProfTek can supply standardised maintenance kits for facility-wide rollouts and arrange formal user training for staff issued kits for the first time.

View products →

2 products

Mobile Anchoring Systems

Sir Safety mobile anchoring systems provide EN 795 certified temporary and reusable anchor points for working at height where permanent anchors are not installed. Mobile device kits, webbing and anchorage slings, and horizontal anchor lines, supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 795:2012 (anchor devices)Type A: Fixed anchorsType B: Portable / movable anchors (most mobile systems)Type C: Flexible anchor lines (horizontal lifelines)Type D: Rigid anchor railsRange: Mobile anchoring device kit, webbing and anchorage slings (5 m to 20 m adjustable)When Mobile Anchors Are RightMobile anchors are the solution when work moves daily across a site (formwork, scaffolding, roofing across multiple panels) and installing permanent anchors is impractical. They are also the standard for emergency response and short-duration maintenance work. ProfTek can supply the anchor with a complete system bundle (harness, lanyard, SRL) matched to the task, see the Maintenance Kits, Roofing Kits, and Climbing Kits categories for pre-assembled packages.

View products →

1 products

Roofing Kits

Sir Safety roofing safety kits are pre-assembled fall protection systems specified for roofing, solar PV installation, gutter work, and roof maintenance. Harness, SRL or rope grab, anchor, and connectors selected for pitched and flat roof applications, supplied across Australia and New Zealand by ProfTek.Kit Contents (Typical)Harness: EN 361 full bodyFall arrest device: EN 360 SRL or kernmantel rope with grabAnchor: EN 795 temporary roof anchorCarabiners: EN 362 auto-lockingStorage: Tool-carrying bag includedCompliance NotesAustralian WHS regulations require fall protection for any work above 2 metres. Roofing-specific kits reduce the procurement burden on small contracting teams while ensuring all components are certified and compatible. ProfTek can supply branded kits with your company name for site identification and arrange the formal user training required under AS/NZS 1891.4.

View products →

20 products

Ropes & Lanyards

Sir Safety safety ropes and lanyards are EN 354 certified work-at-height connection components. Braided polyamide rope, kernmantel construction, and adjustable lanyards with integrated energy absorbers and snap-hooks, supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 354:2010 (lanyards)Length options: Fixed 1 m / 1.5 m / 2 m, adjustable 1 m to 2 m, plus 10 m / 20 m rope sectionsConstruction: Triple-twisted polyamide, braided rope, kernmantelConfigurations: Single lanyard, forked Y-lanyard, with energy absorberConnectors: Steel snap hooks, alloy carabiners, sold individually in Carabiners categoryFall Distance CalculationLanyard length, energy absorber deployment (up to 1.75 m), worker height, and anchor position all contribute to total fall distance. The arrest must complete before the worker reaches a lower level, this is why short SRLs are often preferred over fixed lanyards on low platforms. ProfTek can help calculate fall clearance for your work platform and specify the lanyard length appropriately.

View products →

32 products

Work Positioning Systems

Sir Safety work positioning systems let workers position themselves hands-free at height, tower climbing, pole work, formwork, and scaffolding. EN 358 certified lanyards, lateral attachment points, and accessories supplied across Australia and New Zealand by ProfTek.Technical SpecificationsStandard: EN 358:2018 (work positioning belts and lanyards)Used with: Lateral D-rings on EN 361 harness (Stratos 30, Sokoi 13 models)Lanyard types: Fixed length, adjustable, with positioning hookIMPORTANT: EN 358 positioning is NOT fall arrest, always combine with a separate EN 360/EN 363 fall arrest systemSystem CompatibilityWork positioning is a supplement to, not a replacement for, fall arrest. A complete working-at-height system includes the EN 361 harness (with lateral D-rings if positioning is needed), an EN 358 positioning lanyard, AND an EN 360 SRL or EN 354 lanyard with EN 355 energy absorber for fall arrest. ProfTek can specify a complete system per the task and arrange formal user training.

View products →

Current fall protection range

Featured products

Specifications and application guidance are available on each product page. Contact ProfTek if you need help comparing options.

No products are currently published directly in this category. Explore the categories above or contact ProfTek for assistance.

Application-led selection

The right PPE depends on more than product specifications

ProfTek helps safety and procurement teams consider the complete workplace risk before selecting or replacing PPE.

Hazard & protection classMatch protection to impact, compression, cut, chemical and specialist hazards.

Fit & worker comfortConsider sizing, support, weight, mobility and all-day wearability.

Work environmentConsider temperature, moisture, surfaces and task conditions.

Safety & complianceAssess handling, documentation and environmental obligations.

Need help selecting or replacing PPE?

Share the workplace hazards, environment, workforce and current product. ProfTek will help identify the most practical next step.

Discuss your requirement