Define the lubricant dose with an adjustable metering chamber. METER MIX Chamber Metering Valves use pneumatic control and are available in two volume ranges for single-component grease and oil dispensing. A snuff-back function supports controlled material cut-off at the end of the application.
Choose the chamber size around the required shot volume, then check material viscosity and pressure against the application. These are metering components for a compatible lubrication system, not machines for mixing two-component adhesives or resins.
| Specification | 1002812 | 1002813 |
|---|---|---|
| Metering volume | 0.05–0.5 mL | 0.1–3.0 mL |
| Material viscosity | 1,000–1,000,000 mPa·s | 1,000–1,000,000 mPa·s |
| Working pressure | 40–80 bar | 40–80 bar |
| Maximum pressure | 150 bar | 150 bar |
Published manufacturer specifications are shown for the listed models. Confirm the selected configuration and compatibility with the actual lubricant before ordering.
Download the METER MIX lubrication products brochure (PDF) for the manufacturer’s component specifications.
Share the lubricant data sheet, target shot volume, cycle rate, working temperature and available material pressure. Confirm the pressure compatibility of the complete supply arrangement rather than combining components only by their catalogue names. For doses below this family’s range, review the Mini Metering Valve.
Compare METER MIX supplier range and Lubrication Dispensing Components and METER MIX Mini Metering Valve and METER MIX Piston Pump and METER MIX Dispensing Valve.
Compare related dispensing equipment for your material and production process.
