Supply grease or oil directly from its original container with a METER MIX piston pump. This single-component lubrication family uses a double-acting, chop-check transfer design and a 33:1 pressure ratio. Two models accommodate different drum sizes, allowing the supply arrangement to be matched to the container used in production.
The pump provides the material feed for a lubrication dispensing arrangement. Select it alongside the downstream pressure regulation and dispensing or metering valve; the pump alone is not a complete application system or a two-component mixer.
| Specification | MM200C33-SC00 | MM080C33-SC00 |
|---|---|---|
| Drum size | 200 L | 80 L |
| Pressure ratio | 33:1 | 33:1 |
| Grease consistency range | NLGI 0–3 | NLGI 0–3 |
| Working pressure | 30–180 bar | 30–180 bar |
| Flow rate | 1.1 L/min with 72 cSt servo-grade oil at 40 double strokes | 1.1 L/min with 72 cSt servo-grade oil at 40 double strokes |
| Air consumption | 280 L/min at 40 double strokes | 280 L/min at 40 double strokes |
Published manufacturer specifications are shown for the listed models. Confirm the selected configuration and compatibility with the actual lubricant before ordering.
Download the METER MIX lubrication products brochure (PDF) for the manufacturer’s component specifications.
Provide the lubricant data sheet, drum dimensions, required flow, downstream working pressure and available compressed-air supply. Include installation clearance and container-change requirements so the pump and the rest of the dispensing arrangement can be reviewed together.
Compare METER MIX supplier range and Lubrication Dispensing Components and METER MIX Material Pressure Regulator and METER MIX Dispensing Valve.
Compare related dispensing equipment for your material and production process.
