Control the delivery of grease or oil with a METER MIX dispensing valve. An adjustable outlet opening allows flow to be set for the application, with two valve sizes available for different delivery requirements. These valves are components for a single-material feed and control arrangement, not two-component mixing machines.
Consider this family where the process calls for controlled lubricant delivery rather than a shot defined by a metering chamber. The required flow, material viscosity and feed pressure should be considered together when choosing the valve.
| Specification | 1002815 | 1002816 |
|---|---|---|
| Internal diameter | 2 mm | 6 mm |
| Material viscosity | 10–200,000 mPa·s | 10–200,000 mPa·s |
| Working pressure | 250 bar | 250 bar |
| Maximum pressure | 315 bar | 315 bar |
| Maximum flow at 50,000 mPa·s | 1 L/min | 5 L/min |
Published manufacturer specifications are shown for the listed models. Confirm the selected configuration and compatibility with the actual lubricant before ordering.
Download the METER MIX lubrication products brochure (PDF) for the manufacturer’s component specifications.
Tell ProfTek which lubricant you use, its working viscosity, the desired application pattern, target flow and available material pressure. If a defined dose is required, also provide the shot volume and cycle rate so a metering-valve alternative can be assessed.
Compare METER MIX supplier range and Lubrication Dispensing Components and METER MIX Material Pressure Regulator and METER MIX Mini Metering Valve and METER MIX Chamber Metering Valve.
Compare related dispensing equipment for your material and production process.
