METER MIX LiquidShot 3 offers piston-pump metering for electronic potting, bonding, casting and brush-setting applications. Its range of drive and mounting arrangements allows the dispensing station to be selected around the production layout as well as the required resin volume.
The manufacturer lists polyurethane, epoxy, silicone for processing, with applications including electronic potting, bonding and sealing, brush setting, casting. Suitability for a specific formulation requires a review of its technical data and processing conditions.
The family includes benchtop pneumatic, benchtop electric and portable floor-mounted versions. Select the construction first, then assess reservoirs and application options; the model suffixes describe meaningful configuration differences, not separate material approvals.
| Parameter | Published capability |
|---|---|
| Ratio range capability | 1:1 to 14:1 (depending upon pumps selected) |
| Viscosity acceptance | Up to 500,000 mPa·s (depending upon material thixotropy) |
| Shot size | Available from approx. 1.2 ml up to 63 ml at a ratio of 1:1 by volume |
| Cycle rate | Up to 30 shots per minute (depending upon viscosity) |
| Mixing system | Disposable Static or Rotary/Static |
| Metering system | Piston pump |
These are manufacturer-published capabilities, not a specification for every configured machine. Confirm the pump, feed, mixing and control arrangement for the application.
Use the qualified technical shot range above when comparing the family with smaller or larger equipment. Confirm pot life, shot frequency and component viscosities so that metering, mixing and refill requirements can be reviewed together.
Share the material technical data sheet, operating temperature, required output, container size and manual or automated application requirements with ProfTek.
Download the METER MIX LiquidShot 3 technical data sheet (PDF)
Compare METER MIX LiquidShot 2 and METER MIX LiquidShot 4.
Explore two-component metering and mixing systems or view the METER MIX range.
