METER MIX LiquidShot 4 is a piston-pump system for applications requiring medium-volume metered shots of polyurethane, epoxy or silicone. Typical uses include potting, bonding and casting, with the final configuration governed by ratio, viscosity and the volume delivered at each cycle.
The manufacturer lists polyurethane, epoxy, silicone for processing, with applications including electronic potting, casting, reaction injection moulding, bonding and sealing, brush setting. Suitability for a specific formulation requires a review of its technical data and processing conditions.
The C and CE versions are benchtop configurations; CT and CTE versions are portable floor-mounted arrangements. Pneumatic and electric drive choices allow the installation to be reviewed against the intended control and production requirements.
| Parameter | Published capability |
|---|---|
| Ratio range capability | 1:1 to 24:1 (depending upon pumps selected) |
| Viscosity acceptance | Up to 500,000 mPa·s (depending upon material thixotropy) |
| Shot size | Available from approx. 2.5 ml up to 172 ml at a ratio of 1:1 by volume |
| Cycle rate | Up to 30 shots per minute (depending upon viscosity) |
| Mixing system | Disposable Static or Rotary/Static |
| Metering system | Piston pump |
These are manufacturer-published capabilities, not a specification for every configured machine. Confirm the pump, feed, mixing and control arrangement for the application.
Compare actual shot sizes rather than relying only on the description “medium volume”. The published technical range is stated at a 1:1 ratio by volume, and the achievable cycle rate depends on viscosity.
Share the material technical data sheet, operating temperature, required output, container size and manual or automated application requirements with ProfTek.
Download the METER MIX LiquidShot 4 technical data sheet (PDF)
Compare METER MIX LiquidShot 3 and METER MIX LiquidShot 5.
Explore two-component metering and mixing systems or view the METER MIX range.
